Alarm Communicators


PM 45 4G

Dual SIM 4G + IP

The Permaconn solution provides a constant secure link between the supervised premises and the Central Station.

The PM45 4G is a versatile alarm communicator that reports on 4G, 3G and IP to the Central Station.

This communicator can interface with a range of alarm panels using Contact ID. Primary alarm path is IP, followed by 4G/3G in the event of a wired Ethernet failure. The communicator reports on 4G or 3G if there is no IP connected.

Key Features

  • Remote “over-the-air” alarm panel programming using 4G/3G or IP path
  • Dual SIM + IP alarm communicator
  • Plug & Play solution
  • Interfaces with any Contact ID alarm panel
  • 3 input + 3 output, function control using Atlas and/or Pocket Secure
  • Communicator automatically switches between 4G and 3G networks
  • Low current draw, easily powered from alarm panel

Additional Features

  • Small size – Fits inside alarm panel enclosure and suitable for ATM & M2M applications
  • Secure VPN within Optus & Telstra networks – Dedicated for Permaconn events only
  • AES128 encryption for alarm data – Secure transmissions over the public internet
  • High speed RS232 Interface – Future development
  • PM45-4G acquires an IP address automatically using the customers DHCP service – No IT headache
  • Various diagnostic LEDs – Easy installation
  • Activate, commission and diagnose using Atlas – Seamless installation process
  • Three (3) dedicated paths of communication – Uptime in excess of 99.9%
  • Internal watchdog reset function – No unnecessary service call-outs
  • Monitors & reports dialler interface lead status – Panel dialler to Permaconn interface secure
  • Compliant to AS2201.5:2008
  • Outputs can be configured to arm/disarm alarm system, control gates and lights. ‘Pocket Secure’ smartphone app controls these functions.

Specifications

Housing Material:
ABS plastic - Green
Dimensions:
110mm (h) x 25mm (d) x 80mm (w)
Weight:
120gm
Operating Enviornment:
0°- 50°C @15% to 85% humidity (non-condensing)
Antenna:
Triple band 3G & Triple band 4G
Modem:
Quectel EC21
Power:
8–15V DC. Terminal (must power from appoved supply)
Power Consumption:
Standby: 0.08A @13.8V DC, Transmitting: 0.19A @13.8V DC
Communcation Protocol:
Ethernet (10/100BASE-T)
Network Protocol:
DHCP or Static IP
Serial Port:
High Speed RS232 interface
Auxiliary Input:
3 x 24Hr input - state change detected every second. EOL 3.3K
Auxiliary Output:
3 x Open Collector output @ 50mA (max) Function control using Atlas web portal and/or ‘Pocket Secure’
Static IP Network Configuration:
Ethernet interface using ‘IpSetup’ program Atlas web portal using mobile connection
Data Security:
AES Encryption
Supported Modulation:
BELL-103, ITU-V21/V22/V22B
Approvals:
EN 55022:2006/A1:2007, AS/CA S042.1-2011, AS/CA S042.4-2011 AS/NZS 60950.1-2011, AES2201.5:2008, EN 62311:2008, EN 301489-1 EN 301 489-24, EN 301 908-1, EN60950-1