Permaconn leaders in GPRS security technology

PM 45

The Permaconn solution provides a constant secure link between the supervised premises and the Central Station.

The PM45-3G is a versatile alarm communicator that reports on 3G, GPRS and IP to the Central Station.

This unit can interface with a range of alarm panels using Contact ID. Primary alarm path is IP, followed by 3G/GPRS in the event of a wired ethernet failure. If no IP connection exists the communicators will report on GPRS or 3G only.

The choice is simple. The choice is Permaconn

Key Features

Remote alarm panel Upload/Download available using GPRS/3G/IP
Dual SIM + IP alarm communicator Plug & Play solution Interfaces with any Contact ID alarm panel
1 input + 1 output, function control using Atlas and/or Pocket Secure Low cost hardware solution for NBN or Naked DSL services PM45-3G communicates on 3G & GPRS networks

Additional Features

Housing Material

ABS Plastic - white


110mm (h) x 25mm (d) x 80mm (w)



Operating Environment

0°- 50°C @15% to 85% humidity (non-condensing)


Triple band 3G & Dual band GPRS


Telit HE910


8 - 15V DC Terminal (must be powered from approved supply)

Power Consumption

Standby: 0.08A @13.8V DC
Transmitting: 0.19A @13.8V DC

Communication Protocol

Ethernet (10/100BASE-T)

IP Address Allocation

DHCP or Static IP

Serial Port

High Speed RS232 interface

Auxiliary Input

3 x 24Hr input - state change detected every second. EOL 3.3K

Auxiliary Output

3 x Open Collector output @ 50mA (max)
Function control using Atlas web portal and/or Pocket Secure

Static IP Network Configuration

Ethernet interface using 'IpSetup' program
Atlas web portal using GPRS/3G connection

Data Security

AES Encryption

Supported Modulation

BELL-103, ITU-V21/V22/V22B


EN 55022:2006/A1:2007, AS/CA S042.1-2011, AS/CA S042.4-2011 AS/NZS 60950.1-2011, AES2201.5:2008, EN 62311:2008, EN 301489-1 EN 301 489-24, EN 301 908-1, EN60950-1
The choice is simple. The choice is Permaconn